HRSG Heat Transfer and SCR Performance Improvements Through CFD Modeling and Field Testing
Written by Robert G. Mudry, P.E.
EPRI Heat Rate Conference, February 27, 2024
|
Industrial Applications of CFD
Written by Paul Harris, P.E.
Mini-Symposium on Laminar-Turbulent Transition at University of Arizona, November 2, 2023
|
Estrella del Mar III, a Visionary Floating Power Plant, Is POWER’s Plant of the Year
Written by Sonal Patel
POWER magazine, July 2023
ASC is proud to have contributed on this project with CFD flow modeling of the once-through steam generator (OTSG)
|
Laboratory Evaluation of Potential Condenser Improvements
Written by Rebecca Osteen, Southern Company Research and Development, Andrew Howell, EPRI, and Brian Dumont, P.E. Airflow Sciences Corp
EPRI Conference, August 2022
|
Dryer Computer Simulations
Written by Andrew Banka, P.E.
USDA/CARD Drying Workshop, June 2022
|
Safe and Efficient Natural Gas Plants: Dispersion Tracking from Leaks, Vents, and Exhausts
Written by Robert G. Mudry, P.E.
APC Round Table, June 2022
|
Flow Modeling as a Tool for WHRU Performance Optimization
Written by Amit Gupta, Petro-Chem Development Co. Inc. and Matt R. Gentry, Airflow Sciences Corp
Hydrocarbon Processing, May 2020
|
Modeling of Temperature Gradients During Short Time Dilatometry Testing
Written by Robert Goldstein, Tareq Eddir, Ethan Buchner, Robert Cryderman, Andrew L. Banka, and Andrew P. Senita
Journal of Materials Engineering and Performance, April 2020
|
|
Flow Modeling: Boiler and AQCS with Dual Fuel Burning
Written by Robert G. Mudry, P.E.
WPCA / Duke Energy Co-Firing Seminar, October 2019
|
Ammonia Injection and Mixing Systems
Written by Robert G. Mudry, P.E.
NOx Combustion Round Table, February 2019
|
Improved Methodology for Accurate CFD and Physical Modeling of ESPs
Written by Robert G. Mudry, P.E., Andrew L. Banka, P.E., Brian J. Dumont, P.E., and Jeffrey D. Franklin, P.E., Ph.D., Airflow Sciences, and Gerry Klemm, Southern Company Services
International Conference on ESPs, October 2018
|
Flow Modeling and Testing of ESPs
Written by Robert G. Mudry, P.E.
International Conference on ESPs, October 2018
|
Extensive Planning, Innovative Work Strategies, Teamwork Combine for Successful SCR Project
Written by Darrell Proctor
Power Magazine, August 2018
ASC is proud to have contributed on this project with CFD and physical modeling
|
HVAC Exhaust Fan Modeling Improves Power Plant Performance
Written by Paul J. Harris, Ph.D. and Julie L. Pierce
CFD Review, June 2018
|
Predicting Heat Transfer Rates For Industrial Scale Quench Tanks
Written by Jeffrey D. Franklin, P.E., Ph.D. and Andrew L. Banka, P.E.
3rd Thermal and Fluids Engineering Conference, March 2018
|
Ammonia Injection and Mixing Systems 101 (Coal and Gas)
Written by Kanthan Rajendran, P.E.
NOx Combustion Round Table, February 2018
|
Flow Modeling as a Tool for HRSG Performance Optimization
Written by Matt Gentry
HRSG User's Group, February 2018
|
Accurate Modeling of Quenching Processes Using CFD and a Flow Boiling Database
Written by Andrew Banka, P.E. and Jeffrey Franklin, Ph.D., P.E.
ASM Advanced Materials & Processes, February/March 2017
|
Ammonia Mixing Issues and Lessons Learned
Written by Robert G. Mudry, P.E.
NOx Combustion Round Table, February 2017
|
Optimizing the Glenarm Station Gas Turbine OTSG Through Flow Modeling and Testing
Written by Kevin W. Linfield, Ph.D., P.E., Matt Gentry, and Kanthan Rajendran, P.E.
WPCA News, Winter 2017
|
Flue Gas Testing and Probes
Written by Robert G. Mudry, P.E.
WPCA/TVA "Coal & Gas" Seminar, August 2016
|
Mixing Issues and Lessons Learned
Written by Robert G. Mudry, P.E.
WPCA/TVA "Coal & Gas" Seminar, August 2016
|
Gas Turbines SCR, and Ammonia Mixing Systems
Written by Robert G. Mudry, P.E.
WPCA/TVA "Coal & Gas" Seminar, August 2016
|
DTE Energy, Fermi 2 Turbine Building Ventilation (TBHVAC) Fan Failures
Written by Joseph Bosnyak, DTE Energy,
and Paul J. Harris, Airflow Sciences
NHUG Summer Meeting, July 2015
|
Aerodynamic Drag Reduction of Open-Top Coal Cars in Unit Train Operation and Impact on Train Fuel Consumption and Economics
Written by James C. Paul, P.E.
National Coal Transportation Association Spring General Conference, April 2015
|
Flow Modeling and Pollution Control System Design
Written by Matthew R. Gentry
Energy Generation Conference, January 2015
|
Hot Flow Physical Model Study of Flyash Re-entrainment at Gulf Power Plant Crist
Written by Lauren Porter, Alabama Power, Darryl Wall, Southern Company,
and Jeffrey Everett and Robert Mudry, P.E., Airflow Sciences
WPCA News, Winter 2014
|
"Fan Test" Helps Design Odor Control Center
Written by Matthew M. Fleming
WPCA News, Winter 2013
|
Gas Accumulation Potential & Leak Detection when Converting to Gas
Written by Robert. G. Mudry, P.E.
Coal to Gas Conference, October 2013
|
Southcentral Power Project, Anchorage, Alaska
Written by Dr. Robert Peltier, P.E.
Power Magazine, September 2013
ASC is proud to have contributed on this project with CFD modeling
|
Comparison of Nozzle vs Impeller Agitation in Quench Systems
Written by Andrew L. Banka, P.E. and Tiffany M. Lee
ASM Heat Treat Conference, September 2013
|
Progress on the Development of a Comprehensive Heat Transfer Model for Industrial Liquid Quenching Processes
Written by Jeffrey D. Franklin, P.E., Andrew L. Banka, P.E., William H. Newsome, PH.D.
ASM Heat Treat Conference, September 2013
|
Development of Quench Tank Agitation Design Using CFD Modeling
Written by John D. Nitz, P.E.
ASM Heat Treat Conference, September 2013
|
Reducing ESP Hopper Re-entrainment for PAC/ACI Operation
Written by Gerry Klemm, Southern Company,
and Robert. G. Mudry, P.E., Brian J. Dumont, P.E., Airflow Sciences
Reinhold APC Round Table & Expo, July 2013
|
CFD and Physical Modeling of DSI/ACI Distribution
Written by Matthew R. Gentry
Reinhold APC Round Table & Expo, July 2013
|
Integrating Quench Modeling into the ICME Workflow
Written by Andrew L. Banka, P.E., Jeffrey D. Franklin, P.E., William H. Newsome, PH.D.
ICME Conference, July 2013
|
Evaluation of Flow Fields and Orientation Effects Around Ring Geometries During Quenching
Written by B.L. Ferguson, Dante Solutions, Inc., D. Scott MacKenzie, Houghton International, Inc.,
and Andrew L. Banka, P.E., Airflow Sciences
Journal of Materials Engineering and Performance, March 2013
|
Flow Modeling and Ash Deposition
Written by Robert G. Mudry, P.E.
NOx-Combustion Round Table & Exhibition, February 2013
|
Prediction of Distortion of Simple Geometries as a Function of Flow Field and Orientation
Written by D. Scott MacKenzie, Houghton International, Lynn Ferguson, Deformation Control Technology,
and Andrew L. Banka, P.E., Airflow Sciences
ASM Heat Treat Conference, October 2011
|
Operation of the Holly Refining's FCC SCR Unit in Tulsa, OK
Written by Merle Fritz, Holly R&M, Dennis L. Salbilla, Haldor Topsoe, Inc.,
and Kevin W. Linfield, Ph.D., P.E., Airflow Sciences
WPCA News, Spring 2011
|
An Approach to Wind Blow-Over Risk Reduction at Norfolk Southern Railway
Written by Walter Rosenberger, Norfolk Southern Railroad, Corey Pasta, Burlington Northern and Santa Fe Railway,
and Brian J. Dumont, P.E., Airflow Sciences
ASME Rail Transportation Division Fall Technical Conference, October 2010
|
Energy Efficient Fan Upgrades: The Right Way
Written by Dan Banyay, Robinson Fans Inc.
World Cement Magazine, September 2010
ASC is proud to have contributed on this project with CFD Flow Modeling
|
SCR Catalyst Pluggage Reduction at Progress Energy’s Roxboro Station
Written by Matt Boone, Progress Energy,
and Robert G. Mudry, P.E., Airflow Sciences
MEGA Symposium, August 2010
|
SuperTruck Program Aims to Improve Economy by 50 Percent
Written by Tom Berg, Senior Editor
Heavy Duty Trucking Magazine, June 2010
|
Improving SCR Performance on Simple-Cycle Combustion Turbines
Written by Terry McTernan, PE, Cormetech
Power Magazine, June 2010
ASC is proud to have contributed on this project with CFD modeling
|
Primary and Secondary Air Measurement
Written by Michael Higgins, P.E.
Clearwater Clean Coal Conference, June 2010
|
An Approach To Wind Blow-Over Risk Reduction At BNSF Railway
Written by William Shust, Objective Engineers, Inc., Walter Rosenberger, Norfolk Southern Railroad, Corey Pasta and Larry Milhon, Burlington Northern and Santa Fe Railway,
and Jenifer Miller, Brian J. Dumont, P.E., Airflow Sciences
Joint Rail Conference, April 2010
|
Big Stone Remodels ESP into Pulse Jet Fabric Filter
Written by Thomas Lugar, Buell Division, Fisher-Klosterman et al.
Power Magazine, March 2010
ASC is proud to have contributed on this project with CFD & Physical Flow Modeling
|
Catalyst Pluggage Reduction for Roxboro U3
Written by Matt Boone, Progress Energy
and Robert G. Mudry, P.E., Airflow Sciences
EPRI SCR Workshop, November 2009
|
Flow Modeling for Chemical Processing
Written by Kevin W. Linfield, Ph.D., P.E.
ChemShow, November 2009
|
Design Considerations for Air Dilution Cooling of Gas Turbine Exhaust
Written by Christian Kauffman, P.Eng., IST
IAGT Symposium, October 2009
ASC is proud to have contributed on this project with CFD modeling
|
Top Plants - Nebraska City Station Unit 2
Written by Dr. Robert Peltier, P.E.
Power Magazine, October 2009
ASC is proud to have contributed on this project with CFD & Physical Flow Modeling
|
Quench Tank Performance and Part Quality Through CFD Analysis
Co-authored by Andrew L. Banka, P.E.
ASM Heat Treat Conference & Expo, September 2009
|
2009 Plant of the Year – CWPL Dallman Station
Written by Dr. Robert Peltier, P.E.
Power Magazine, August 2009
ASC is proud to have contributed on this project with CFD & Physical Flow Modeling of the SCR
|
The Ultimate ESP Rebuild: Casing Conversion To a Pulse Jet Fabric Filter, A Case Study
Contributions by Kevin W. Linfield, Ph.D., P.E., and Dennis C. Manning
Electric Power Conference, May 2009
|
Modeling Helps Ensure Effective ACI Mercury Capture
Written by Kevin W. Linfield, Ph.D., P.E.
Inside the APC Industry - ICAC Newsletter, April 2009
|
The Application of CFD to Rail Car and Locomotive Aerodynamics
Co-authored by James C. Paul, P.E.
Clean Heavy Duty Vehicle Conference, March 2009
|
Application of CFD to Rail Car and Locomotive Aerodynamics
Co-authored by James C. Paul, P.E.
Published as part of a collection by Springer-Verlang, 2009
The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains
|
The Pros and Cons of CFD and Physical Flow Modeling
Written by Kevin W. Linfield, Ph.D., P.E. and Robert G. Mudry, P.E.
WPCA News, Issue 14, Fall 2008
|
Gas Flow - How to Improve It to Enhance ESP, Boiler, FGD, SCR, SNCR Performance
Written by Robert G. Mudry, P.E.
WPCA's Duke Energy Seminar, September 2008
|
Application of CFD for Analyzing Quenching and Quench System Design
Written by Andrew L. Banka, P.E.
Quenching & Control of Distortion in Heat Treated Gears Conference, September 2008
|
CFD and FEA Used To Improve the Quenching Process
Written by Andrew L. Banka, P.E. and Jeffrey D. Franklin, P.E.
Heat Treating Progress Magazine, September 2008
|
Engineered Transfer Chute Technology - Air Flow & Dust Mitigation
Co-authored by Kevin W. Linfield, Ph.D., P.E.
COAL-GEN Conference, August 2008
|
Understanding Gas Flow to Improve ESP Performance
Written by Robert G. Mudry, P.E.
WPCA's Ameren Seminar, August 2008
|
Correlation of Computational Fluid Dynamics and Physical Scale Models for Flue Gas Desulferization Systems
Written by Jeffrey D. Franklin, P.E., Robert G. Mudry, P.E. and Holly Skelton
ANSYS Conference, August 2008
|
Applying CFD to Characterize Gear Response During Intensive Quenching Process
Co-authored by Andrew L. Banka, P.E.
ANSYS Conference, August 2008
|
SCR Flow Modeling
Written by Brian J. Dumont, P.E.
Southern Company Service Technical Conference, August 2008
|
The Pros and Cons of CFD and Physical Flow Modeling
Written by Kevin W. Linfield, Ph.D., P.E. and Robert G. Mudry, P.E.
White Paper, August 2008
|
Intensive Quenching Technology for Advanced Weapon Systems
Co-authored by Andrew L. Banka, P.E.
Final Report for U.S. Army, December 2007
|
Controlled Cooling Improves Forging, Quality, Throughput and Cost
Co-authored by Andrew L. Banka, P.E. and Jeffrey D. Franklin, P.E.
Forge Magazine, October 2007
|
Pleasant Prairie Power Plant Air Quality Control Upgrade Project, Pleasant Prairie, Wisconsin
Power Magazine, October 2007
ASC is proud to have contributed on this project with CFD & Physical Flow Modeling
|
CFD Modeling of the Intensive Quenching Process
Co-authored by Andrew L. Banka, P.E. and Jeffrey D. Franklin, P.E.
ASM Heat Treating Society Conference, September 2007
|
Practical Applications of CFD In Heat Processing
Written by Andrew L. Banka, P.E.
Heat Treating Progress Magazine, August 2005
|
Pulverized Coal Extractive Testing Methods
Written by Robert G. Mudry, P.E.
COAL-GEN Conference, August 2005
|
Flow Modeling for Popcorn Ash Capture
Written by Kevin W. Linfield, Ph.D., P.E.
NOx Conference, February 2005
|
Flow Modeling of Wet Scrubbers
Written by Brian J. Dumont, P.E.
WPCA's Duke Energy Scrubber Seminar, June 2004
|
Combined CFD/Shell Model for Product Beds
Written by Andrew L. Banka, P.E.
AACC Conference, October 2003
|
CFD Solves Forgings-Cooling Problem
Written by Jeffrey D. Franklin, P.E. and Andrew L. Banka, P.E.
Industrial Heating Magazine, March 2003
|
Computational Fluid Dynamic Modeling of Electrostatic Precipitators
Written by Brian J. Dumont, P.E. and Robert G. Mudry, P.E.
Electric Power Conference, March 2003
|
Electrostatic Precipitator Performance Improvement Through Computational Fluid Dynamic Modeling
Written by Brian J. Dumont, P.E. and Robert G. Mudry, P.E.
PowerGen International, December 2002
|
Air Mixer Drastically Reduces Temperature Stratification in Pulverizer Ductwork
Written by Robert K. Nelson
Power Engineering Magazine, November 2002
|
ESP Gas Flow Fundamentals
Written by Robert G. Mudry, P.E.
ESP/FF RoundTable, August 2002
|
Computational Fluid Dynamic Modeling of Electrostatic Precipitators
Written by Brian J. Dumont, P.E. and Robert G. Mudry, P.E.
8th International Conference on Electrostatic Precipitation, May 15, 2001
|
|